Wire Rope Sling

Description

Eye Wire Rope Sling  is one of the most common types of removable load-gripping devices made of a metal rope with a 6x36 or 6x19 design. The eyes of the rope sling are formed by manual braiding or by installing a sleeve and its further compression on a hydraulic press.

Hand braiding requires more time to make the sling and the skills of the braider, especially when it comes to large diameter ropes. The bushing is crimped in the press much faster, which makes it possible to significantly speed up the process of manufacturing load-handling products, reduce the cost of production, and, accordingly, reduce the cost of products for the end customer. In addition, rope slings with a sleeve look aesthetically pleasing and are not traumatic, since the ends of the strands do not stick out, as in slings with a braid.

Features of the rope sling of the SKP design:

• absolutely conforms to the EN 13414 standard;
• made of Gostovsky rope;
• designed for operation at a temperature of -40°С to +200°С;
• tested with a load that is 50% higher than the design load capacity of the product;
• a wide range of carrying capacities: from 0.32 to 20 tons;
• the possibility of manufacturing any length at the discretion of the customer.

Carger Group online store offers to buy Eye Wire Rope Slings with a carrying capacity from 0.63 to 20 tons on favorable terms, for the production of which we use ropes with a diameter of 6.2 - 46.5 mm. The length of the sling can be any as agreed with the customer. After manufacturing, each sling is tested for strength, after which a serial number is assigned to the finished product and a passport is issued.